Comments on: Adding a Swiveling TV Mount

By: Mike

Mike — Mon, 31 Oct 2016 16:28:46 +0000

In reply to Billy Baxter. Glad you got it figured out! One other suggestion... we've found that over time with lots of driving, some of the bolts/screws that allow the TV to be adjusted start loosening and the TV get "wobbly". We recently put some Loctite on the bolts and re-attached them to keep things more secure. -Mike

By: Billy Baxter

Billy Baxter — Thu, 27 Oct 2016 14:31:15 +0000

I mike,
I have just gotten around to putting the swivel mount on the tv and I had to change the entire way you had yours.I didn’t realize the back of my tv was different than yours.I had to put the wings on the brackets because the mounting holes were a lot future apart than yours.A lesson learned but,I got it mounted and ready to go.Thank you for your help.Safe travels.

By: Billy

Billy — Sun, 17 Jul 2016 18:40:05 +0000

Great job Mike.I will ordering this mount also thank you for your response on my post on Irv2.

By: Mike

Mike — Fri, 20 Feb 2015 15:23:15 +0000

In reply to Pablo. No, there's a decent gap there. So far it hasn't been a problem, even with some sharp turns.

By: Pablo

Pablo — Fri, 20 Feb 2015 15:09:54 +0000

I wonder if you could use velcro between the arm & wall; and between the arm & back of the TV to help provide some holding power when the TV is in the recessed position. It’s has to tell if the arm lays flat enough against the wall/TV to allow for the velcro to make contact.

By: Bernie Gilles

Bernie Gilles — Tue, 03 Feb 2015 04:45:32 +0000

I’ve been looking at floor plans to get ideas for our next RV and noticed the TV to the side and wondered about the stiff neck thing. This post confirms that idea so I’ll add that to my list. Nice job on the mounting!